104
3
Taking Pictures
You can give the image sharp or soft outlines.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sharpness].
3
Use the four-way controller (45)
to change the sharpness level.
F Soft
G Normal
H Sharp
4
Press the 3 button.
The camera returns to capture status.
If the Blink Detection function works when shooting, the message
[Closed eyes have been detected] appears for 3 seconds during Instant
Review.
Setting the Image Sharpness (Sharpness)
If you change the [Sharpness] setting frequently, you can save time by
assigning it to the Green button (p.107).
Rec. Mode
Saturation
MENU
Exit
3/3
Sharpness
Contrast
Green Button
Memory
Date Imprint Off
To Next Page
Loading...
