102
3
Taking Pictures
The camera automatically corrects camera shake when taking still
pictures. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Shake
Reduction].
3
Use the four-way controller (45)
to select O or P.
O Corrects camera shake.
P Does not correct camera shake.
•
Face Detection AF and AE may not work if the subject is wearing sunglasses,
has part of their face covered or is not looking toward the camera.
• If the camera cannot detect the subject’s face, the camera focuses
using the setting currently selected in [Focusing Area].
•
When [Face Detection] is set to [Smile], the shutter may not be
released automatically because the Smile Capture function may not
work in some situations, such as when the detected face is too small. If
this happens, press the shutter release button to release the shutter.
• [Face Detection] cannot be set to [Off] in b (Auto Picture), c
(Portrait), B (Night Scene Portrait), d (Natural Skin Tone) or R
(Kids) mode.
• [Face Detection] is automatically set to [On] in 9 (Green), b (Auto
Picture), c (Portrait), B (Night Scene Portrait), d (Natural Skin
Tone) or R (Kids) mode. When switching to another mode from one of
these modes, the Face Detection setting returns to the previous
setting.
•
For movies, the Face Detection function is activated before recording
starts. The face detection frame is not displayed while recording a
movie.
Setting the Shake Reduction Function
Use the Movie SR function (p.112) to correct camera shake when
recording a movie.
Rec. Mode
2/3
Instant Review
MENU
Exit
Shake Reduction
Digital Zoom
D-Range Setting
Face Detection On
Blink Detection
To Next Page
Loading...
Need help?
General
Weight and Dimensions
