Pentax Optio S1 - Changing the Sound Settings

165
7
Settings
You can adjust the volume of operation sounds and change the type of
sound.
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
2 Use the four-way controller (23) to select [Sound].
3 Press the four-way controller (5).
The [Sound] screen appears.
Subsequent steps vary depending on your
selection.
4 Use the four-way controller (23) to select [Operation
Volume].
5 Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound,
operation sound, and self-timer sound.
6 Change [Playback Volume] in the same way as in Steps
4 and 5.
4 Use the four-way controller (23) to select [Start-up
Sound].
5 Press the four-way controller (5).
A pull-down menu appears.
6 Use the four-way controller ( 23 ) to select the sound type.
Choose from [1], [2], [3] or [Off].
Changing the Sound Settings
To Change the Operation Volume/Playback Volume
To Change the Sound Type
Sound
Operation Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
MENU
Playback Volume
1
1
1
1