Pentax Optio S1 - Changing the Video Output Format

173
7
Settings
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
2 Use the four-way controller (23) to select [Folder
Name].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23) to select [PENTX] or
[Date].
5 Press the 4 button.
The setting is saved.
When you take pictures and/or play them back with the camera
connected to AV equipment, select an appropriate video output format
(NTSC or PAL).
1 Press the 3 button in Q mode.
The [W Setting] menu appears.
2 Use the four-way controller (23) to select [Video Out].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to select a video output format.
Choose the video output format to match
the input format of the AV equipment.
Changing the Video Output Format
Setting
Video Out
Brightness Level
2/3
Auto Power Off
Reset
Delete All
5 sec.
Power Saving
3 min.
NTSC
PAL
MENU OK
OKCancel