147
5
Editing and Printing Images
Optional Frames
In addition to the built-in frames that come with the Optio S1, there are 90
different optional frames included on the provided CD-ROM (S-SW116). You
can save the optional frames to the camera’s built-in memory or an SD Memory
Card. To save them to the built-in memory, first remove the SD Memory Card
before proceeding.
To Copy Frames
1
Connect the camera to a computer using the provided
USB cable (I-USB116).
Refer to “Connecting to a Computer” (p.181) for instructions on
connecting the camera to a computer.
2
When the device detection window opens, click
[Cancel].
3
Insert the CD-ROM (S-SW116) into the CD-ROM drive.
4
When the installer window opens, click [EXIT].
5
Copy the desired files from the FRAME folder in the
root directory of the CD-ROM to the FRAME folder on
the camera (removable disk).
For information on working with files on a computer, refer to the
instruction manual supplied with the computer.
6
Disconnect the USB cable from the computer and
camera.
Refer to “Connecting to a Computer” (p.181) for instructions on
disconnecting the cable.
To Next Page
Loading...
