47
1
Getting Started
7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller (23)
to change the month.
Change the day and year in the same
manner.
Next, change the time.
If you selected [12h] in Step 4, the camera
automatically switches the display between
am and pm corresponding to the time.
9
Press the four-way controller (3)
to select [Settings complete].
10
Press the 4 button.
This confirms the date and time.
If you press the 4 button in Step 10, the camera clock is reset to 0
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 0 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the settings made up to that point and switch to the capture
mode by pressing the 3 button. In this case, the [Initial Setting]
screen will appear again the next time you turn the camera on.
The language, date, time, Hometown city, and DST setting can be changed.
Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.171).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.166).
• To change the Hometown city or DST setting, follow the steps in “Setting the
World Time” (1p.168).
MENU
Date Adjustment
Cancel
Date Format
Date
Time
Settings complete
00:00
mm dd yy/ / 24h
01/01/2011
MENU
Date Adjustment
Cancel
Date Format
D
ate
Time
Settings complete
00:00
mm dd yy/ / 24h
01/01/2011
OK
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
