56
2
Common Operations
Ex.) To set [Focusing Area] on the [A Rec. Mode] menu
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller (3).
The frame moves to [Recorded Pixels].
3
Press the four-way controller (3) twice.
The frame moves to [Focusing Area].
4
Press the four-way controller (5).
A pull-down menu appears only with the
items that are available with the current
camera settings.
5
Use the four-way controller (23)
to change the setting.
The focusing area changes each time the
four-way controller (23) is pressed.
6
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting the other
functions.
To exit the setting operation, press the 3 button.
To perform another operation, refer to the following alternate Step 6
options.
Rec. Mode
1/3
MENU
Exit
EV Compensation
Recorded Pixels
White Balance
AE Metering
Sensitivity
Focusing Area
AWB
Auto
0.0
Rec. Mode
1/3
MENU
ၭ
Exit
EV Compensation
Recorded Pixels
White Balance
AE Metering
Focusing Area
AWB
0.0
Sensitivity
Auto
Rec. Mode
1/3
MENU
Cancel
OK
OK
EV Compensation
Recorded Pixels
White Balance
AE Metering
Sensitivity
Focusing Area
AWB
0.0
To Next Page
Loading...
