VisuNet Control Center 6
Manage (Home)
2023-05
27
Figure 6.14 Select your target device
3. Click "Next".
4. In the summary recheck your selections and click "Execute" to proceed further.
Category Description Troubleshooting
Communication Status Offline Make sure your device is
online.
Write Filter Write Filter is enabled. Please
deactivate the write filter.
Please refer to chapter
"Device Commands" to dis-
able the Write Filter by restart-
ing the device.
RM Shell Version Incompatible RM Shell Ver-
sion.
Refer to the RM Shell and
Image version in the Device
Status to check on your RM
Shell version. Use the correct
update, available online.
OS Version Unsupported OS Version.
Please download the relevant
update for your OS.
Refer to the Software informa-
tion in the About tile in your
RM Shell to check on which
Operating System your device
is based on.
Disk Space Not sufficient storage avail-
able. Please use the Cleanup
Disk Wizard.
Please use the Cleanup Wiz-
ard. If the storage after clean-
ing up the disk is still not
sufficient we recommend to
update your device with the
latest factory reset version
>6.0. This will adapt your par-
tition and increase the avail-
able storage.
License Status Checks if a valid VisuNet Con-
trol Center License is
assigned to the Device.
Assign VisuNet Control Cen-
ter License
To Next Page
Loading...
