Pepperl+Fuchs VisuNet RM Shell 6 User Manual

VisuNet RM Shell 6
System Settings App
2023-05
107
8.13 VisuNet CC
You have the ability to enable/disable VisuNetCC connectivity and configure some of the perti-
nent connection timeout settings. The preconfigured settings are considered the defaults.
Changing them is not advised unless you are experiencing problems. For slow connections
within the network we recommend to increase the open/close timeout.
Figure 8.25 VisuNet CC Settings
Note
To use VisuNet Control Center an additional licence is required. It is recommended to use your
own certificate. Find more information of VisuNet CC online at www.pepperl-fuchs.com.
Note
It is recommended to install your own certificate with private key in the trusted root directory
(local machine). This can be done by deselecting the default check mark and then selecting
the certificate.

Pepperl+Fuchs VisuNet RM Shell 6 Specifications

General

Brand	Pepperl+Fuchs
Model	VisuNet RM Shell 6
Category	Industrial Equipment
Language	English