VisuNet RM Shell 6
How-Tos
2023-05
143
11.6 Calibrating a second touchscreen
When a DMU is connected with the VisuNet FLX panel, it occurs that when the screen is
expanded and not duplicated that the touch event on the main FLX panel occurs on the DMU
panel. There are several alternatives to set up a second monitor.
Setup via system settings
1. Open the system settings and search for touch.
Figure 11.18
2. Select Calibrate the screen for pen or touch input.
Figure 11.19
3. Select Setup
Note
Make sure that you have a keyboard connected to the device.
To Next Page
Loading...
