VisuNet RM Shell 6
Profiles Management App
2023-05
55
General Settings
Display Settings
After configuring the connection profile as desired, click "Apply Changes."
Option Description
Profile Name Name of the KVM connection profile that is presented on the
home screen.
KVM Switch Network
Name / IP address
Per default the DHCP is enabled. Ensure that you use the follow-
ing Network Name to setup the first connection: kvm.local
Refer to the Raritans manual if you require a static IP.
Username User name that is stored on the Raritan KVM switch that you want
to connect to.
Default User DKX4-101: admin
Password Password of the user that is stored on the Raritan KVM switch
that you want to connect to.
Default password DKX4-101: raritan (for user “admin”)
Port Number/Port Name This setting can be used on Raritan multi-port KVM-over-IP
switches to select the port number you want to connect to.
Ping server before connect Use the ping mechanism to check whether the device is available
before connecting.
Block user from closing the
connection
This function removes the "Close" function from the connection
bar. Note that this function does not stop the user from closing the
connection via other client mechanisms, e.g., the Raritan client
menu bar.
Option Description
Show the connection bar Enable this option to show the connection bar at the top of the
screen. The connection bar fades out automatically after a few
seconds. It fades in when you move the mouse to the top of the
screen
To Next Page
Loading...
