Pepperl+Fuchs VisuNet RM Shell 6 - Page 74

2023-05
74
VisuNet RM Shell 6
App Management
Figure 7.5
Hide Wedge App from Operator
In VisuNet RM Shell 6 it is also possible to hide the Wedge app from the Operator. To do so,
perform following steps:
1. Log in as an Administrator.
2. Go to System Settings.
3. Select Wedge Configuration.
4. Activate the option Hide Wedge App from the Operator on Main view.
5. Apply changes.
6. Wedge App will not be shown in Operator view.