Permobil Explorer Mini - Warnings and Precautions

Explorer Mini Repairs - Table and backrest unit
4.5.2 Installing the table and backrest unit
The following tools are necessary for this task:
• Torque wrench.
• Allen socket, 4 mm.
• Screwdriver or pliers.
1. Put the Explorer Mini on a flat surface.
Figure 25. Positions for the on/off button (A) and the
main circuit breaker (B).
2. Press the on/off button (A) to turn off the power.
3. Turn off the main circuit breaker (B).
Figure 26. The gap (d) between the screw and the
plastic surface.
4. Make sure there is a gap (d) of 0.2″ between the screw and the
plastic surface.
22