Pfaff 438 Series

4.2
Setting:
Adjustment:
4.2.1
.2
.3
.4
.5
Stitch width scaie
When the stitch width control is set at "0" the zero mark on the stitch width scale
must be opposite mark 3 of the stitch width lever.
4.0.2
Movestitch width lever1 to the rightas faras it will go.
Loosen screws 2.
Adjust the stitch width scale untii the zero mark is opposite mark 3 of stitch width
ieverl.
in this position tighten both screws 2.
Check this adjustment (see "Setting").
9
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com