Sewing
18
8 Sewing
In the sewing mode all settings, which are relevant for the sewing operation, are shown on
the display. Functions can be switched on or off by pressing a key.
The "PM" function key is used to choose between manual sewing (LED off) and programmed
sewing (LED on).
8.01 Manual sewing
Switch on the machine. ●
Press the "TE/Speed" key once to call up the current speed. ●
4000
If necessary, change the maximum speed by pressing the relevant plus-minus key. ●
Other functions in the manual sewing mode, also see Chapter 6.02.03 Function keys:
Start tacks on/off
Foot position raised at end of seam
sector on/off
End tacks on/off Thread trimming on/off
Needle position raised
when sewing stops on/off
Sewing with light barrier on/off
Foot position raised when
sewing stops on/off
Sewing is carried out with the pedal functions. ●
To Next Page
Loading...
General