Sewing
19
8.01.01 Altering the number of bartacks
Switch on the machine. ●
A B C D
3 3 3 3
Press the relevant plus-minus key to select the desired value for the number of forward ●
stitches (A) of the start bartack.
Press the relevant plus-minus key to select the desired value for the number of reverse ●
stitches (B) of the start bartack.
Press the relevant plus-minus key to select the desired value for the number of reverse ●
stitches (C) of the end bartack.
Press the relevant plus-minus key to select the desired value for the number of forward ●
stitches (D) of the end bartack.
8.01.02 Piece counter
The piece counter display can only be called up if parameter 180 is set at "ON".
Switch on the machine. ●
Press the "TE/speed" key three times, to call up the piece counter menu (LED on). ●
Reset the piece counter by pressing the "F ● 4/reset piece counter" key.
Press the relevant plus-minus keys to change the piece counter value.
3x
PieceCnt 36
To Next Page
Loading...
General