Safety
7
1.05 Operating and technical staff
1
.05.01 Operating staff
Operating staff are the persons responsible for setting up, operating and cleaning the machi-
ne and for eliminating any malfunctions in the sewing area.
The operating staff is obliged to observe the following points:
For all work the notes on safety in this Instruction Manual must always be observed! ●
Any working methods, which adversely affect the safety o the machine, must be avoided! ●
Any changes occurring ton the sewing machine drive, which may affect its safety, must ●
be reported to the user immediately!
1.05.02 Technical staff
Technical staff are persons who have been trained in electrical engineering/electronics and
mechanical engineering. They are responsible for servicing, repairing and adjusting the ma-
chine.
The operating staff is obliged to observe the following points:
For all work the notes on safety in this Instruction Manual must always be observed! ●
Before carry out any repair work, the main switch must be switched off and measures ●
taken to prevent it from being switched on again!
Never work on parts or equipment still connected to the power supply! Exceptions are ●
only permissible in accordance with the regulations EN 50110.
All safety covers must be replaced after the completion of maintenance and repair work! ●