Sewing
27
8.02.02 Example of a seam program input by sewing the seam sectors (teach-function)
Example: Top-stitching a collar
1. Program number 2, three seam sectors
2. Seam sector 1,
Functions: Programmed stop and sewing foot raised at end of seam sector,
3. Seam sector 2
Functions: Programmed stop and sewing foot raised at end of seam sector,
4. Seam sector 3
Functions: Programmed stop, sewing foot raised at end of seam sector and
thread trimming.
Seam program 2
Switch on the machine. ●
Activate the programmed sewing mode (LED on): ●
2 1 10
Using the relevant plus-minus key, select the program number, e.g. " ● 2".
Call up the menu for entering the seam sectors and the program link. ●
1000 3 0
Seam sector 3
Seam sector 2
Seam sector 1
To Next Page
Loading...