Sewing
28
Using the relevant plus-minus key, select the number of seam sectors, e.g. " ● 3".
Using the relevant plus-minus key, select the linked seam program, e.g. " ● 0", if no program
link is to take place.
Call up the menu for entering the seam sector and the corresponding number of stitches. ●
2x
2 1 10
Switch on the "programmed sewing stop" function (LED on). ●
Switch on the "foot position raised at end of seam sector" function (LED on). ●
Switch on the teach function (LED on). ●
Sew seam sector " ● 1" with the pedal functions. The number of stitches sewn is shown on
the display, e.g. "49".
TEACH
2 1 49
Using the relevant plus-minus key, select the seam sector " ● 2".
TEACH
2 2 10
Switch on the "programmed sewing stop" function (LED on). ●
Switch on the "foot position raised at end of seam sector" function (LED on). ●
To Next Page
Loading...
General