Input
32
9 Input
9
.01 Parameter input
9
.01.01 Example of how to enter the parameters
Switch on the machine. ●
Press the "TE/Speed" key twice to call up the parameter input function (LED on). ●
Select the parameter, e.g. Parameter ● 660 for bobbin thread monitoring, by pressing the
relevant plus-minus keys.
2x
Enter the desired value for the selected parameter, e.g. "2" for " bobbin thread rest coun- ●
ter on", by pressing the relevant plus-minus keys.
No VAL
A 101 ON
No VAL
A 660 1
Conclude the parameter input (LED off). ●
No VAL
A 660 2
To Next Page
Loading...