Sewing
22
Other functions in the programmed sewing mode, also see Chapter 6.02.03 Function keys:
Start tacks on/off Program speed on/off
End tacks on/off Reverse sewing direction on/off
Needle position raised
when sewing stops on/off
Manual seam sector on/off
Foot position raised when
sewing stops on/off
Programmed sewing stop on/off
Foot position raised at end
of seam sector on/off
Sewing with light barrier on/off
Thread trimming on/off Stitch counting on/off
Sewing is carried out with the pedal functions. ●
If the "scroll" key is operated again, the number of bartack stitches is displayed. Altera- ●
tions can be carried out with the relevant plus-minus keys, see Chapter 8.01.01 Altering
the number of bartacks.
If the "scroll" key is operated again, the piece counter is displayed. Alterations ●
can be carried out with the relevant plus-minus keys or with the "F4 /reset piece
counter" key, see Chapter 8.01.02 Piece counter.
A B C D
3 3 3 3
PieceCnt 36
To Next Page
Loading...