Sewing
24
1000 4 0
Using the relevant plus-minus key, select the number of seam sectors, e.g. " ● 4".
Using the relevant plus-minus key, select the linked seam program, e.g. " ● 0", if no program
link is to take place.
Call up the menu for entering the seam sector and the corresponding number of stitches. ●
2x
1 1 20
Using the relevant plus-minus key, select the seam sector " ● 1".
Using the relevant plus-minus key, enter the number of stitches for the seam sector, e.g. ●
"20".
Activate the start bartacks (LED on). ●
Switch on the "programmed sewing stop" function (LED on). ●
Switch on the "foot position raised at end of seam sector" function (LED on). ●
Switch on the stitch counting function (LED on). ●
To Next Page
Loading...
General