7 Maintenance
WARNING
Danger to life from electric shock during maintenance and service work
The device is only completely de-energized when the mains plug has been disconnected and the
vacuum pump is at a standstill. There is a danger to life from electric shock when making contact with
live components.
►
Before performing all work, switch off the main switch.
►
Wait until the vacuum pump comes to a standstill (rotation speed =0).
►
Disconnect all connection cables.
►
Remove the mains plug from the device.
►
Secure the device against unintentional restarting.
The display and control unit cannot be repaired. In the event of a defect, replace the entire device with a
replacement part.
Maintenance
29/38
To Next Page
Loading...
