PhaseOne 645DF - Check Disk; Firmware

78
Check Disk
A disk check is performed on every memory card that is inserted into the IQ
back. Phase One recommends leaving this feature turned on, to maximize
data security on the memory cards. This feature can be deactivated in this
menu. Read more about the Phase One Secure Storage System on page 54
of this User Guide.
Restore to Default
Selecting Restore to Default will restore the IQ unit back to its default factory
settings. Be careful before using this option as all previous settings will be
lost.
Firmware
It is important to keep the IQ’s Firmware up-to-date to ensure you get any
new features and remove any bugs or errors from previous Firmware ver-
sions. Firmware updates can be found in the download section at
www.phaseone.com. Download the latest IQ Firmware from the website,
transfer it to a memory card and insert it into the IQ’s card slot. Select
Update Firmware and the IQ back will automatically detect and implement
the update from the card.
Select Restore Firmware will revert to the previous Firmware version. Select
Dump Log to transfer Log information to a CompactFlash card for analysis.
About
The About option displays technical information about the hardware and
embedded Firmware in the IQ back. This is especially useful if support is
needed or if you want to check if Phase One is oering a newer rmware
update.
Please make a note of the entire contents of the About box before contacting
your dealer or Phase One Support.