PhaseOne 645DF User Manual

88
Single-Frame Mode (S)
Press the shutter release button for each shot. The camera meters adequate
exposure value for each shot and performs Auto Bracketing. The camera
stays in the Auto Bracketing mode until you cancel the Auto Bracketing
mode manually.
Continuous Mode (C)
By pressing the shutter release button once, the camera takes 3 shots in
series. With each full press of the shutter release button, the camera repeats
auto-bracketing. The standard (normal) exposure value will be xed when
you take the rst frame.
Cancelling Auto Bracketing
When you want to cancel the auto-bracketing mode, turn the rear dial to
change “On” to “OF”.
NOTICE:
When exposure compensation is initiated
by pressing the exposure compensation
button, shooting in Auto Bracketing mode
is possible using the exposure value to
which the exposure compensation value
has been added.
Exposure Mode Setting
P
Program AE Shutter speed varies
Av
Aperture Priority AE Shutter speed varies
Tv
Shutter Priority AE Aperture varies
M
Manual Mode Shutter speed varies
X
X-sync mode No setting
AE Settings Under Auto-bracketing Mode

PhaseOne 645DF Specifications

General

Camera Type	Medium Format DSLR
Autofocus	Yes
Shutter Type	Focal Plane Shutter
Storage	Depends on digital back
Lens Mount	Mamiya 645 AF mount
Shutter Speed Range	1/4000 to 1 hour
ISO Range	Depends on digital back
Flash Sync Speed	1/125 sec
Metering	TTL metering
Sensor Type	CCD/CMOS (depending on back)
Sensor Size	Depends on digital back
Resolution	Depends on digital back
LCD Screen	Depends on digital back
Weight	870 g (body only)