Philips 4000 - Core Machine Specifications

PHILIPS 4000 and 3000 02 TECHNICAL SPECIFICATIONS
1/5
 2.1. Technicalspecications
Power supply and output: 240 V~ 50 Hz 1850 W - 230 V~ 50/60 Hz 1850 W
120 V~ 60 Hz 1500 W
Temperature monitoring: (NTC) variable resistor sensor - transmits the value to the
electronic card
Safety system: 2 thermostats at 190°C one shot
Coffee heat exchanger output:
Stainless steel
(230 V~) 1900 W - (120 V~) 1300 W - (100 V~) 1100 W
forcoffee,hotwaterandsteamdispensing
Gear motor: 2 rotation directions; power supply 24VC
Pump: Ulka Type EP5/S GW approx. 13-15 bar with reciprocating
pistonandthermalswitch100°C48W,230V,50Hz,120V,
60Hz100V,50/60Hz
Overpressure valve: Opening at approx. 16-18 bar
Waterlter: In tank
Coffee grinder: Directcurrentmotorwithatceramicgrinderblades
Automatic dosage: Dose adjustment controlled by the electronic system
Power consumption: During heating phase- approx. 5.6 A
Dimensions: W x H x D in mm: 215 x 330 x 429 mm
(data may vary depending on the model)
Weight: 6.7 kg - 7.5kg (OTC)
Water tank capacity: 1.8 l
Coffee bean hopper capacity: 250 g. / 1 cup
Dreg drawer capacity: 15
Watercircuitllingtime: Approx.15secMax.onrstllingcycle
Heating time: Approx. 45 sec.
Grinding time: Approx. 8-10 sec.