Philips 4000 - Pump Component Removal; Flow-meter Component Removal; Boiler Component Removal

PHILIPS 4000 and 3000 07 DISASSEMBLY
7/9
7.10. Flow-meter
Lifttheowmeteroutofthecasingassemblyandremovetheelectrical
and water circuit connections.
Unscrew the screw shown and remove the
electrical and water circuit connections.
Unscrew the screw shown at
unthread the support boiler
7.11. Boiler
7.9. Pump
Disconnect the water circuit connections (A) and
electricalconnections(B),loosenthesafetyvalve(C)and
slide the pump off the brackets (D).
Unhook the pump
from the supports.
C
D
D
A
A
A
B
B
B