Philips 4000 - Essential Documentation and Safety Precautions

PHILIPS 4000 and 3000 01 INTRODUCTION
1/6
1.1 Documentation required
The following documentation is needed for repair procedures:
• Instructionbookletforspecicmodel
• Technicaldocumentationforspecicmodel(diagrams,explodedview,symptoncureand
service manual)
1.2 Tools and equipment required
Aswellasthestandardequipment,thefollowingisrequired:
Qty. Description Notes
1 Screwdriver
1 Pliers for Oetiker clamps
1 CC -A - Vdc tester
1 Digital thermometer Scale limit > 150°C
1 SSC (Saeco Service Center) Programmer
(for programming and diagnostics mode)
1.3 Material
Material Code and Description
Thermal paste Heat resistance > 200°C
Descaler 21001901 “ACC SAE DECALCIFIER 5 L 1 UNIT”
Grease solvent 132253695601 “PARALIQ GB 363”
Silicone grease 14-INTGR22004 “ACC TUBE FIN FOOD GREASE 2 400 ML”
1.4 Safety warnings
We recommend you consult the technical manual of the machine before performing any mainte-
nance work.
Observe all applicable standards relating to the repair of electrical appliances.
Always disconnect the power plug from the mains before beginning repair work.
Always disconnect the power plug from the mains before beginning repair work.