Philips 4000 - Page 50

PHILIPS 4000 and 3000 05 SERVICE MODE
9/18
When the Steam-Out is complete the following parameters are reset to their default values:
Length “Espresso” product (Default 128 impulses)
Length “Espresso Lungo” product (Default 292 impulses)
Length “Large Coffee” product (Default 428 impulses)
Length “Cappuccino” (Coffee + Milk product) (Default170impulsescoffee&34secmilk)
Length “Milk” product (Default 34 seconds)
Stand-By Time (Default 15 minutes)
Coffee Ground (Default 0)
TherequestforPrimingtheCircuitattherstswitchonisset.
Brewing Unit Empty
Aroma Strength Espresso (Default 3 beans)
Aroma Strength Large Coffee (Default 4 beans)
BU current array (BU during rinsing) (Default 150mA)
Grinder Sensing Array Default 2000ms)
Grinding time Aroma Very Light (1 Bean) (Default 3000ms)
Grinding time Aroma Light/Medium (2/3 Beans) (Default 3500ms)
Grinding time Aroma Strong/Extra Strong (4/5 Be-
ans)
(Default 4000ms)
Filter Presence (Default OFF)
Filter Pulses (Default 0)
Last Error Log (Default 0)
CoffeeDuctEmpty=TRUE(Togrindmorersttimeaftersteam-outandrellductwithcoffee)