EasyManua.ls Logo

Philips CED370 - Connect Wires: ISO Connectors

Philips CED370
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
If necessary, connect the following:
Connector Connect to/with
1 Blue cable Sub woofer out
2Green/white
wire
Parking (see ‘Connect
parking brake wire’ on
page 16) switch (see
‘Connect parking brake
wire’)
3 White cable Left front line out
4 Red cable Right front line out
5 White cable Left rear line out
6 Red cable Right rear line out
7Pink wire Camera
8 Yellow cable Camera in
9 Yellow cable Video in
10 Yellow cable Video out 2
11 Yellow cable Video out 1
12 White cable Left audio in
13 Red cable Right audio in
1
2
3
4
5
6
7
8
9
0
!
"
§
Connect wires: ISO connectors
Caution
Ensure that all loose leads are insulated with
electrical tape.
1 Pull out the ISO connectors from the
car dashboard and connect them to
the bigger end of the supplied standard
connector.
2 Connect the other end of supplied
standard connector to the unit.
English
EN

Other manuals for Philips CED370

Related product manuals