Manually setting the time & date
if the time is incorrect, this could be due to a weak or disrupted TV signal if this is the case,
switch off the automatic function
3
4
5
6
7
8
9
10
11
If the setting
Press SYSTEM-MENU on the remote control. The menu bar
will appear
Select 'T_' using 41 or • .
Select line 'Installation' using CH-• or CH+ • and confirm
with •
Select line 'Time/Date' using CH-• or CH+ • and confirm
with •
Select 'Manual with CH- • or CH+ • .
Confirm with OK.
Change the time in line 'Time' using the number buttons 0,,9 on
your remote control
Check 'AM/PAt, 'Yea_, 'Month', and 'Date' in the same way,
To select between the fields, use CH- • or CH+ •
Change the information with • , • or the number buttons
0..9.
Select one of the following settings in line 'Daylight Saving':
'On': The time set corresponds to the summer time (summer
time is on)
'Off: The time set corresponds to the winter time (summer time
is off)
When all settings are correct, confirm with OK.
To end, press SYSTEM-MENU.
has been confirmed with OK the automatic system is disabled.
Time/Date
Manual
Time
AM/PM
Year
Month
Date
Daylight Saving
09:02
AM
2003
01
01
Off
To exit press
SYSTEMMENU
Installing your DVD recorder 29
To Next Page
Loading...
Need help?
General
