Selecting the recording mode (quality)
By selecting a recording mode, you define the picture quality of recordings and the maximum
recording time for a disc.
You can check the quality by switching to a recording mode watching the picture via the builtqn
tuner. (Press the MONITOR button).
For playback, the correct picture quality will automatically be selected.
1
Switch on the TV. If required, select the channel number for the
DVD recorder (channel 3 or 4 or the Audio/Video In channel)
Select the record mode with the button REC MODE on the
remote control
Which recording modes can I choose?
'M/': High Quality offers the best picture quality with a total recording
time of I hour.
'M2': Standard Play (pre-recorded DVD quality) offers excellent picture
quality with a total recording time of 2 hours.
'M2x_: Standard Play plus (better than S-VHS picture quality) offers
excellent picture quality with a total recording time of 2,5 hours.
'M3': Long Play (S-VHS picture quality). Total recording time of 3 hours,
'M4': Extended Play (better than VHS picture quality). Total recording
time of 4 hours,
'M6': Super Long Play (VHS picture quality). Total recording time of 6
hours.
Can I also change the recording mode via a menu?
1 Press the SYSTEM-MENU button.
2 Select 'T_' using • or • .
3 Select line 'Record settings' using CH-• or OH+ • and
confirm with • .
4
5
6
At 'Rec Mode; select the recording mode using • or • .
Confirm with OK and end with SYSTEM-MENU,
If you select the 'M3', 'M4' or 'M6' recording modes, you can select
the 'Stndrd (standard) or 'Spor_ (for quick movements) settings
in the 'Filter mode' line,
Tip
50 Recording
To Next Page
Loading...
