How to change or delete a programmed
recording (TIM ER)
3
Switch on the TV, If required, select the channel number for the
DVD Recorder (channel 3 or 4)•
With the Recorder on, press TIMER on the remote control•
The programming method selected last is marked•
Select 'Timer List using CH-• or CH+ • and confirm with
4
Select the programmed recording (TIMER) you want to check,
change, or delete with CH- • or CH+ • •
Delete programmed recording
Press the CLEAR button,
Confirm with OK, 'Timer Clearecf will briefly appear on the TV
screen•
'-J appears rather than the displayed values
To end, press TIMER. Tip
Timer
Timer List
aec
Date Ch. Start End Mode
01/22 01 04:25PM 06:05PM M2
Total record time: 01:40
To change To exit
Press _ PressTIMER
5
6
7
8
9
Press •.
Select the entry field with • or • .
If required, change the information with CH+ • , CH-• or
the number buttons 0..9.
In 'Date', you first enter the month and then the date•
Confirm with OK•
To end, press TIMER.
Switch off with STANDBY _3.
Programming a recording (TIMER) 63
To Next Page
Loading...
