Playing a DVD+RW or DVD+R
1
[f the inserted disc has been write-protected or it is a finalized
DVD+R, playback starts automatically.
2
If playback does not start automatically, select the title you want
to play from the index screen using ell- • or CH+ • .
You can also use the 1_14 or IwllH buttons on the front of the
recorder
3
Press the PLAYI_ button.
The following will appear on the display:
title/chapter number, elapsed time.
xl see the message E_FP_,_L on the display
¢_ There are no recordings on this disc.
4
To stop playback, press STOP • on the remote control or
• on the DVD recorder.
5
To eject the disc, press OPEN/CLOSE-_& on the front of the
DVD recorder.
What do I must pay attention to with regard to recordings that
have been recorded in different recording modes?
During playback, the device will automatically switch to the proper mode
'M1, M2, M2x, M3, M4, M_.
For more information, please read the section Selecting the recording
mode (quality)' in the chapter 'Recording'.
Playing audio CDs
You can also use the DVD Recorder to pay audio CDs
1
2
Insert an audio CD Playback starts automatically
Audio CO display
If the TV is turned on, the Audio CD display will appear on the screen.
During playback, the number of the current track wilI be shown on the
screen and display. Tip
Stop playback with STOP • Track number and total play time
are displayed.
Problem 1
!
f-t-'l// F_I_II_IF_ PI_I 1
I_1_1 I
I
IIIIIIIIIIIIIIIIIIIII
Playback 35
To Next Page
Loading...
Need help?
General
