Philips DVDR 75 - Remote Control Type Settings

'Low power': Ifthe DVD Recorder isswitched off using STANDBY _, the clock display is not
visible.
'Off: Ifthe DVD Recorder is switched off using STANDBY _, the clock display is visible.
'Demo mode': If the DVD Recorder is switched off with the STANDBY _) button, a list of the
most important features is shown in the display
'Display'
You can change the brightness of the display on the DVD recorder. This setting only affects the
DVD Recorder when it is switched on.
'Bright': The display appearswith normal brightness
'Dimmed': The displayappears lessbright.
'Off: The display isswitched off.
Remote control settings
In this menu you can set the remote control type to which your DVD Recorder should respond:
'DVD playe_: The DVD Recorder also responds to a DVD player remote control (remote
control code RC-6).
Choose this setting if your PhilipsTV remote supports DVD functions.
'DVD recorde_: The DVD Recorder only responds to the supplied remote control.
User preferences 69