Search with time entry
Using this function, you can select where playback should start (elapsed time)
1
During playback, press the SYSTEM-MENUbutton on the
remote control The menu bar will appear at the top of the
screen
2
3
4
Select '_)' with _ or • and confirm with CH-V. The
playback is stopped and the screen displays how much play time
has already elapsed.
Enter the desired start time for the playback using the number
buttons 0-9.
Confirm with OK.
I xThe time that I entered is blinking on the screen
¢" The selected title is shorter than the time entered. Enter a new time
or cancel the function with SYSTEM-MENU Problem
Playback will now start at the time you entered.
Repeating/Shuffle
1
You can select an entire section or the entire disc for repeat playback. Depending on the disc
type (DVD-Video, DVD+RW, Video-CDs), you can select chapters, titles or the entire disc.
3
Select the desired chapter, title or disc and start playback,
During playback, press PLAY MODE, By pressing
MODE again, you can select from the following options:
•) _ Repeat chapter (DVD only)
Repeat track/title
) _-_ Repeat entire disc (video CD, audio CD only)
•) ' _%_° ': Shuffle
•) No display: no repeat
PLAY
To cancel the repeat, press STOP •
You can also keep pressing PLAY MODE until the displays
disappear
40 Other playback functions
To Next Page
Loading...
