Philips Efficia CM Series - Network Test

Performance Verification Testing
Efficia CM Series Service Guide 3-31
Network Test
Network Test
If your Efficia monitor is equipped with a wireless LAN module, perform the following
procedure to test the module.
Step
1
Open the Diagnostics Menu. See “Accessing the Diagnostics Menu and
Maintenance Options” on page 3-6.
2
Select Network Test.
3
Select Diagnostics. The status of the wireless module will be checked, and
information displayed.
4
If no information is displayed, verify that the module is installed correctly
and repeat the test. If the second test is unsuccessful, replace the wireless
module.
Note — Philips employees record this value as NT:P or NT:F.