ErgoLine D330/D340
Customer Engineer Manual
Page 1-4
•
Context sensitive Softkeys
Interfaces
•
Static interface - an RJ11 socket on the terminal base which supplies
input/output control. This can be used with a second bell, door opener or door
lamp as output, or with a footpedal as input.
•
Audio input/output which can be connected via the RJ11 socket on the
terminal base
•
Interchangeable line interfaces:
•
4-wire S
0
interface
•
2-wire U
PN
interface
•
PC interface for use with TAPI compliant applications
•
Infra-red interface for communicating with the optional ASCII keypad
Options
•
DSS (Direct Station Select) modules offering an additional 14 programmable
keys per module. Up to three modules can be connected to an ErgoLine D340
giving a total of 12 (blue keys on the phone) + 14 (DSS) + 14 (DSS) + 14 (DSS) =
54 programmable keys. Each key can be programmed with 2 functions or 2
speed-dial numbers, or 1 function and 1 speed-dial number. The DSS modules
are field installable and require an external power supply.
•
V.24 data option allowing data transfer from the ErgoLine D340. The V.24
option requires an external power supply and is field upgradable. The V.24
option occupies one of the two B-channels allowing a voice call to be made
at the same time as a data call.
Note: The V.24 data option has a fixed TEI of 1. i.e. the DTX-I, DLX-U, DLC-U and
PNT-1 must be in 2B mode to make the data available.
•
ASCII keypad for entering messages or updating the internal directory. The
ASCII keypad is an infra-red device and can be installed by the user himself.
•
The ErgoLine D340 is normally line powered. However, a power supply is
required if either a V24 option or DSS is fitted.
Variants
•
The ErgoLine D340 can hold up to 4 languages
•
A choice of two colours is available
To Next Page
Loading...
