Philips ErgoLine D320 - ErgoLine Installation Guide; Unpacking and Power Supply

ErgoLine D330/D340
Customer Engineer Manual
Page 2-1
I
NSTALLATION
This section provides the information required to complete the installation of the
ErgoLine D330 and ErgoLine D340 terminals.
Unpacking
Inspect the shipping carton for any shipping damage
before
unpacking.
Unpack the contents of the box carefully, ensuring that all items are removed
before disposing of the packaging. Each box contains the following:
ErgoLine D330
•
ErgoLine D330 main terminal unit
•
Handset
•
Line cord
•
Handset cord
•
PC interface (TAPI) software diskette (3.5 inch)
•
Function key labels (blank)
•
Quick Reference Guide
ErgoLine D340
•
ErgoLine D340 main terminal unit
•
Handset
•
Line cord
•
Handset cord
•
PC interface (TAPI) software diskette (3.5 inch)
•
Function key labels (blank)
•
Quick Reference Guide
Power Supply
The ErgoLine D330 can only be line powered.
The ErgoLine D340 can be line powered or mains powered. An external power
supply, which is available as an option, is required when the following options are
fitted:
•
V.24 data option
•
DSS (Direct Station Select) modules
When an external power supply is fitted, the ErgoLine D340 automatically detects
the power source and will perform a reset operation.
The external power supply requires 220-240V AC, 50/60Hz mains power.
The ErgoLine D330 and ErgoLine D340 are equipped with an EEPROM so
programmed information is not lost if the power is removed.