ErgoLine D330/D340
Customer Engineer Manual
Page 3-3
•
Options marked
**
are only available in Service mode. The Service
mode password is
12687
.
See User Guide for details.
Terminal Locking and Unlocking of the D330/D340
The user is able to lock the set using LOCK MODE. Consult the User Guide on how
to do this. The default password for Lock Mode is 111. This can be changed by
the user.
Reset Lock password to default
If the user forgets the password, the following steps must be taken to reset the
password to the default:
1. Enter the service password again to enter Service mode.
2. Go to the password option in the Set phone menu and enter the default
password.
3. Verify the default password and exit service mode.
The Lock password is now returned to default.
Unlock the terminal the moment the password is not known
If the terminal is locked and the password is forgotten, the phone can be
unlocked as follows:
1. Press Lockoff
2. Enter the Service password (12687)
The set will return to user mode.
Perform the procedure outlined in steps 1-3 above to reset the Lock password to
default.
To Next Page
Loading...
