Philips ErgoLine D320 - Page 30

ErgoLine D330/D340
Customer Engineer Manual
Page 2-10
The following display will appear on the screen:
2. Press the
SetMode
(soft) key.
The following display will appear on the screen:
3. Enter the service password of the set,
12687
.
Note
: This password cannot be changed. It is for the use of maintenance
personnel only
The following display will appear on the screen:
4. Press the
OK
key. The display will return to idle indicating that the Service Mode
is active.
5. Press Shift, Hold.
The following display will appear on the screen:
6. Press the
TEI
(soft) key.
The following display will appear on the screen:
Set phone
[ à Options]
Set phone
[Enter password]
Password:_
Set phone
[OK to accept]
Password:******_
Service menu
[ à Options]
Set terminal endpoint i.d. [OK accept]
TEI: 0
Language
Downl. Req
Change
Sounds
TEI
SetMode
Erase
Clean
Cancel
Cancel
Cancel
Cancel
Cancel