Philips ErgoLine D320 - Page 40

ErgoLine D330/D340
Customer Engineer Manual
Page 2-20
D
O
-
NOT
-
DISTURB
(
FUNCTION CODE
5)
Extension is
Do-not-disturb
entitled: facility class mark 25.
Facility codes for activate (facility number 28) and cancel (facility number
29) do-not-disturb have to be downloaded.
N
IGHT
A
BSENCE
(
FUNCTION CODE
6)
Extension is either:
•
Main Common Night Extension
•
Sub Common Night Extension
•
Individual Night Extension
•
Permanent Line Extension
•
Overflow Extension
Note
: These extension types are assigned by OM commands.
Facility codes for night extension absent (facility number 57) and night
extension present (facility number 58) have to be downloaded.
E
XECUTIVE
/S
ECRETARY
A
BSENCE
(
FUNCTION CODE
7)
Extension is a member of an executive/secretary combination.
Facility codes for executive/secretary absent (facility number 26) and
executive secretary present (facility number 27) have to be downloaded,
when programmed without directory number.
G
ROUP
A
BSENCE
(
FUNCTION CODE
8)
Extension is a member of a group.
Facility codes for group member absent (facility number 47) and group
member present (facility number 48) have to be downloaded.
I
NTERCOM
E
NABLE
Y
ES
/N
O
(
FUNCTION CODE
32)
Default setting is
intercom enable on
(yes).
No preconditions.
S
END
T
ONES
(DTMF) (
FUNCTION CODE
33)
No preconditions.
S
WITCH
M
ODE
(V
OICE
/D
ATA
)(
FUNCTION CODE
37)
Only for an ErgoLine terminal with a data interface.