To Next PageTo Next Page
Need help?Do you have a question about the Philips HP L1502 and is the answer not in the manual?
General| Screen Size | 15 inches |
|---|---|
| Resolution | 1024 x 768 |
| Brightness | 250 cd/m² |
| Response Time | 25 ms |
| Connectivity | VGA |
| Aspect Ratio | 4:3 |
| Viewing Angle | 120° (H) / 100° (V) |
| Input Connectors | 1 x VGA |
| Weight | 3.5 kg |
Describes the power management states and LED indicators.
Provides instructions for attaching and removing the monitor pedestal.
Table listing common monitor problems, their causes, and solutions.
Detailed instructions and requirements for performing Hi-Pot testing on the monitor.
Procedures for adjusting display settings, including flicker and color calibration.
Steps for performing automatic color calibration using specific test patterns.
Procedures for adjusting color temperature using a color analyzer.
Information and procedures for reprogramming DDC data and EEPROM.
Detailed guide for reprogramming the Analog DDC IC with specific software.
Details the content and structure of DDC 2B data for analog signals.
Steps to modify DDC data, including EDID version, week, and year.
Provides troubleshooting tips for common issues encountered during ISP operations.
Flowchart section addressing troubleshooting steps when the display shows no image.
Flowchart section addressing troubleshooting steps for poor brightness issues.
Flowchart section for diagnosing and resolving general bad image quality problems.
General guidelines and cautions for handling, removing, and attaching Surface Mounted Devices.
Details of the approved panel specifications, including optical and electrical characteristics.
Explains the monitor's behavior in fail-safe modes, such as out-of-range signals.
Explains OSD menu structures and how factory defaults are affected by reset.
Defines limits for visual and electrical defects found on the LCD panel.
Summary of various tests performed on the monitor, including transportation and vibration tests.
List of international agency approvals and compliance certifications for the monitor.
Specifications related to the monitor's internal power supply.
Details the monitor's ability to synchronize with various video formats and timings.
Information on DDC protocols and EDID structure, including version and support.
Specifies the environmental requirements for the monitor's operation and storage.
Details safety standards and certifications met by the monitor.
Describes how the monitor enters and exits power management states.
Lists the 11 pre-set video modes with factory configurations.
Describes OSD button functions, including menu navigation and hot keys.
Lists Electromagnetic Compatibility (EMC) requirements and approvals.
Procedure for resetting monitor settings to factory defaults.
