Philips Optimus

To Next Page

To Previous Page

▪ Lead the primary power cable(s) of QC13:1 (front and rear) through the current transformer(s) at each converter

and reestablish the connection to the capacitor.

Optimus 65/80 with 2 converters:

Both current transformers must be inserted the same way.

(Polarity, secondary transformer pins are marked with 1 and 2).

▪ Reestablish primary cable(s) at QC3:1 too.

▪ Reestablish all connections (mains cables of converter(s) at ENK1 :1 :3 :5.

Converter test kit OPTIMUS for OPTIMUS 50/65/80 gen‐

erators release 3.x with converters 4512 104 7231x

Conv test Optimus CSIP Level 1 (08.0)

Philips Optimus - Page 23