AXC F X152
88 / 104
PHOENIX CONTACT 107708_en_09
Manufacturer's declarations
For the current manufacturer’s declarations, go to: www.phoenixcontact.net/product/2404267
UL: Additional information
Overvoltage category 2
Pollution degree 2
Operating mode Indoor use
Minimum temperature rating and size of the cables to be
connected to the field wiring terminals
min. 75°C and 24...16AWG
– All types are intended to be used in final safety enclosure, which shall conform with requirements for protection
against the spread of fire and shall have adequate rigidity acc. to UL61010‑1 & UL61010‑2‑201.
– If the device is used in not specified manner, the protection provided by the device may be impaired.
– The supply source and ext. circuits intended to be connected to this device shall be galv. separated from mains
supply or hazardous live voltage by reinforced or double insulation and meet the requirements of SELV circuit
of UL/IEC61010‑2‑201 and clause 9.4 Limited energy circuit of UL/IEC61010‑1 or NECClass2.