EasyManuals Logo

Phoenix Contact RAD IFS Series User Manual

Phoenix Contact RAD IFS Series
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
RAD-...-IFS
12 / 198
PHOENIX CONTACT 105542_en_05
1.6 Notes for individual I/O extension modules
For RAD-DI4-IFS, RAD-DOR4-IFS, RAD-DAIO6-IFS
For RAD-AO4-IFS
1.7 UL notes (RAD-2400-IFS and I/O extension
modules only)
For RAD-2400-IFS wireless module
For the I/O extension modules
WARNING: Risk of electric shock
Use the same phase for digital inputs and outputs. The isolating voltage between the in-
dividual channels must not exceed 300 V.
Use either the current or voltage output at every analog channel.
INDUSTRIAL CONTROL EQUIPMENT FOR HAZARDOUS LOCATIONS 45FP
A This equipment is suitable for use in ClassI, Zone2, IIC T4 and ClassI, Division2,
Groups A, B, C, D T4A hazardous locations or non-hazardous locations only.
B WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UN-
LESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS.
C WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR CLASS 1, DIVISION 2.
D These devices are open-type devices that are to be installed in an enclosure suit-
able for the environment that is only accessible with the use of a tool.
E WARNING - Exposure to some chemicals may degrade the sealing properties of
materials used in relays within this device.
F WARNING - EXPLOSION HAZARD - S-PORT IS FOR MAINTENANCE AND
PROGRAMMING ONLY AND SHOULD ONLY BE USED WHEN THE AREA IS
KNOWN TO BE NON-HAZARDOUS.
INDUSTRIAL CONTROL EQUIPMENT FOR HAZARDOUS LOCATIONS 45FP
A This equipment is suitable for use in ClassI, Zone2, IIC T4 and ClassI, Division2,
Groups A, B, C, D T4A hazardous locations or non-hazardous locations only.
B WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UN-
LESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS.
C WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IM-
PAIR SUITABILITY FOR CLASS 1, DIVISION 2.
D These devices are open-type devices that are to be installed in an enclosure suitable
for the environment that is only accessible with the use of a tool.
E WARNING - Exposure to some chemicals may degrade the sealing properties of ma-
terials used in relays within this device.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Phoenix Contact RAD IFS Series and is the answer not in the manual?

Phoenix Contact RAD IFS Series Specifications

General IconGeneral
BrandPhoenix Contact
ModelRAD IFS Series
CategoryTransceiver
LanguageEnglish

Related product manuals