Photon Systems Instruments FMT150 - Page 10

© PSI (Photon Systems Instruments), spol. s r. o.
10
• 400 ml (in FMT150/400)
• 1000 ml (in FMT150/1000)
• 3000 ml (in FMT150/3000)
3.1.2 LED LIGHTING
The high-power light emitting diodes generate a highly uniform irradiance flux that can be controlled in the range
0 – 3,000 mol.m
-2
.s
-1
PAR. The irradiance can be dynamically modulated by the FMT150 control unit or by the PBR
software. Spectra are shown in Fig. 3.
Two standard LED panel versions are available, each color is controlled independently:
• White-Red panel: maximum intensity 1,500 mol.m
-2
.s
-1
(white 750 / red 750 mol.m
-2
.s
-1
)
• Blue-Red panel: maximum intensity 1,500 mol.m
-2
.s
-1
(blue 750 / red 750 mol.m
-2
.s
-1
)
Two optional upgraded LED panel versions are available, each color is controlled independently:
• White-Red panel: maximum intensity 3,000 mol.m
-2
.s
-1
(white 1,500 / red 1,500 mol.m
-2
.s
-1
)
• Blue-Red panel: maximum intensity 3,000 mol.m
-2
.s
-1
(blue 1,500 / red 1,500 mol.m
-2
.s
-1
)
Optional customized panel versions:
• White-Blue: maximum intensity 1,500 mol.m
-2
.s
-1
• White-Blue with Light Upgrade: maximum intensity 3,000 mol.m
-2
.s
-1
• Red: maximum intensity 750 mol.m
-2
.s
-1
(no light upgrade available)
• White: maximum intensity 1,500 mol.m
-2
.s
-1
• White with Light Upgrade: maximum intensity 3,000 mol.m
-2
.s
-1
• Blue: maximum intensity 1,500 mol.m
-2
.s
-1
• Blue with Light Upgrade: maximum intensity 3,000 mol.m
-2
.s
-1