Photon Systems Instruments FMT150 - Additional Software Licence; Light Upgrade; Supplementary;Replacement Components

© PSI (Photon Systems Instruments), spol. s r. o.
59
The function of the external light is controlled manually by the front panel of the PBR control unit or by PBR software. For
manual operation via front panel please refer to chapter 7.1 on page 62.
5.12 ADDITIONAL SOFTWARE LICENCE
A separate license is required for each additional PBR software installation.
5.13 LIGHT UPGRADE
Increases intensity of actinic light in the Photobioreactor. The maximum reachable depends on light color as listed on page
10.
5.14 SUPPLEMENTARY/REPLACEMENT COMPONENTS
5.14.1 SUPPLEMENTARY PH/T PROBE
Additional sensor probe to pH/Temperature module.
5.14.2 ADDITIONAL CABLE TO PROBES
Supplementary cable and connector for O
2
or pH/Temperature measuring probe.
5.14.3 SUPPLEMENTARY O
2
PROBE
Additional sensor probe to O
2
module.
5.14.4 O
2
MEMBRANE KIT
O
2
membrane replacement kit for O
2
probe. Includes: 4 membrane bodies, 1 O-ring set, 25 ml electrolyte.
5.14.5 CO
2
MEMBRANE KIT
CO
2
membrane replacement kit for CO
2
probe. Includes: 4 membrane bodies, 1 O-ring set, 25 ml electrolyte.
5.14.6 SUPPLEMENTARY VESSEL (STANDARD MODEL)
Additional vessel, suitable for cultivation in the range of 5 °C – 75 °C (FMT 150/400); 10 – 75 °C (FMT 150/1000 and FMT
150/3000). Made from stainless steel and glass, it includes the frame, lid and glass body. Manufactured in a 400 ml, 1000
ml or 3000 ml version.
5.14.7 ENHANCED VESSEL
Suitable for cultivation in the range of 0 – 75 °C. Made from nickel-plated brass covered with ceramic layer that improves
heat convection. Manufactured in a 400 ml, 1000 ml or 3000 ml version.
5.14.8 REPLACEMENT GLASS WINDOW FOR CULTIVATION VESSEL
Includes only the glass body (not the frame, base, or lid). Made of boiling glassware, thickness 3.3 mm. Delivered for 400 ml,
1000 ml or 3000 ml vessels.
5.14.9 GASKET KIT FOR CULTIVATION VESSEL
It includes 5 pcs Silicone gasket for vessel base, 5 pcs Silicone gasket for vessel lid, 5 pcs Silicone O-ring 75/3, 15 pcs Silicone
O-ring 16/2. Delivered for 400 ml, 1000 ml or 3000 ml vessels.