PIAGGIO Beverly 400 E5 - Page 140

CAUTION
KEEP THE CRANKSHAFT IN ONE OF THE TWO HALVES
OF THE CRANKCASE WHEN SEPARATING IT. IF YOU FAIL
TO DO THIS, THE CRANKSHAFT MIGHT ACCIDENTALLY
FALL.
- Remove the gasket and be careful with the align-
ment dowels.
- Remove the by-pass and the oil bulkhead.
- After removing the oil bulkhead, blow and clean
thoroughly before fitting.
Coupling chart
N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
Engine Beverly 400 E5
ENG - 140