REASSEMBLY
- Working in reverse order to the removal, insert
the components while taking care to follow the fol-
lowing guidelines:
- Place the rollers as shown in the photo, after ev-
ery two leave a clearance so that each pair has its
opposite for proper balance.
- Lubricate the parts of the clutch pack with the
recommended product.
Recommended products
Transmission oil 80W-90 Lubricant for gear-
boxes and transmissions.
SAE 80W-90 API GL-4
CAUTION
THE CLEARANCE RECOVERY SPRING DISCS ARE FIT-
TED INDIVIDUALLY.
THE FIRST IN THE ASSEMBLY PHASE MUST BE POSI-
TIONED TOWARDS THE INSIDE OF THE HOUSING, AS
SHOWN IN FIGURE.
Engine Beverly 400 E5
ENG - 98
To Next Page
Loading...
